Chassis and sill trimming completed.

The green Hardura chassis trim I had previously cut (using an old grey trim as a template) was glued on after the stainless trim had been rivetted in place; so the outer edge could be poked with a screwdriver into the slot in the strip. Handling these pieces of Hardura (smothered in contact adhesive) was very difficult on my own, as they were over 2m long!

The final result is very pleasing - something to do with the combination of materials, as well as my accuracy.

The last job (very fiddly) was to reassemble the peculiar rear door stay arrangement.

.